Search this site

VRM Toning uses a highly stable, Q-switched Nd:YAG laser to deliver short, rapid pulses of energy into the dermis. Unlike aggressive peeling lasers, VRM works by targeting only the melanin (pigment) in the skin. The laser shatters these pigment clusters into microscopic particles, which are then naturally processed and removed by your body’s immune system. The VRM Toning Advantage: Melasma & Pigment Control: Exceptionally effective for managing sensitive pigment concerns like Melasma and deep-seated sunspots that don't respond to topical creams. Complexion Polishing: Beyond removing spots, the gentle thermal energy stimulates a mild rejuvenation effect, helping to shrink pores and provide a smoother, more "polished" appearance. True No-Downtime: This is a "lunchtime" procedure. You can return to your daily routine, including applying makeup, immediately after the session with no visible peeling or crusting. Professional Customization: Consistent results require a steady hand and a tailored approach. At Forena Clinic, we adjust the laser frequency and energy levels based on your skin's specific pigment depth and sensitivity. Your optimal treatment cycle and settings will be expertly determined after a personal consultation to ensure a bright, balanced, and high-definition result. Technology Q-Switched Nd:YAG (VRM/Spectra) Primary Goal Shattering pigmentation, treating Melasma, and evening skin tone Ideal For Dullness, sunspots, Melasma, and uneven complexion Sessions 5–10 sessions recommended for peak results, 1–2 weeks apart Procedure Time 10–15 minutes Recovery Zero downtime; mild, temporary pinkness for 30 minutes

Our PicoFraxel service for the Butterfly Zone is engineered for clients who struggle with both "pitted" texture and "brown spots" (hyperpigmentation/sunspots) on the nose and inner cheeks. Using picosecond technology, this laser creates "micro-explosions" under the skin that shatter melanin into tiny particles while stimulating collagen, all without the intense heat of older fractional lasers. The Pico-Pigment Advantage: Targeted Pigment Shattering: Unlike traditional heat-based lasers, PicoFraxel uses a photo-mechanical effect to break down brown spots and pigmentation into dust-like particles that the body easily clears. Butterfly Zone Clarity: Focuses specifically on the high-visibility area where sun damage and enlarged pores often cluster, providing a clear and high-definition central profile. Modeling Pack Cooling: Immediately following the Pico pulses, we apply a professional modeling mask. This "Mummy Pack" provides a minimal-irritation cooling seal that calms the skin and reduces temporary redness. Professional Customization: Pigmentation depth varies from person to person. At Forena Clinic, we adjust the Pico wavelength to target either surface-level sunspots or deeper dermal pigment. Your specific laser settings and treatment map will be expertly determined after a personal consultation to ensure a bright, even-toned result. Technology Picosecond Fractional Laser + Professional Modeling Pack Target Area Butterfly Zone (Nose & Inner Cheeks) Primary Goal Shattering brown spots, clearing pigmentation, and pore refinement Sessions Minumum of 5 sessions recommended, spaced 3–4 weeks apart Procedure Time 40-50 minutes (including prep & pack) Recovery Very minimal; mild redness for 24–48 hours; UV protection required for the first 1-2 weeks

Ionto Brightening Treatment is a specialized recovery program designed to stabilize and restore the skin post-procedure by combining cryo-calming, ultrasonic technology, and targeted ingredient infusion. Treatment duration: 5 minutes Recommended for: Those looking for gentle, basic skincare Those who want low-irritation brightening care Post-Treatment Guidelines: This treatment is gentle on the skin, but please avoid activities that may disrupt your skin’s oil-water balance. Keep your skin well-hydrated and apply sunscreen when going outside to maintain the treatment results. If you experience any breakouts or allergic reactions after the treatment, please contact us and visit the clinic as soon as possible. Important Note: Basic skincare treatments focus on the epidermis (skin surface) to improve hydration, texture, and radiance. While they can provide an immediate “glass skin” effect, they are designed for maintenance and skin conditioning, not as a substitute for medical procedures that address deep sagging, acne scars, or permanent wrinkles.

The Mint Thread Lift is our most powerful non-surgical solution for visible sagging. While other threads rely solely on collagen stimulation over time, MINT (Molded Injection Threads) are manufactured using a patented molding process. This creates robust, bi-directional cogs that wrap around the thread in a 360-degree spiral, providing the necessary "anchoring" power to physically lift and secure the skin in a more youthful, elevated position. The MINT Power Advantage: Instant Physical Lift: Because the cogs are molded onto the thread (rather than cut into it), they are incredibly strong. This allows for an immediate lifting of the nasolabial folds, jowls, and sagging jawline. 360° Anchoring: The helical arrangement of the cogs ensures the thread grips the tissue from all angles, providing a more stable and uniform lift compared to traditional 2D barbed threads. Collagen Synthesis: Made from PDO (Polydioxanone), the threads naturally dissolve over 6–9 months, but leave behind a structural "support beam" of your own collagen that maintains the lift for much longer. High-Definition V-Line: This is the gold standard for achieving the "K-beauty" V-line silhouette, effectively narrowing the lower face by repositioning volume back toward the cheekbones. Professional Customization: Lifting is a game of vectors. At Forena Clinic, our medical team analyzes your facial fat pads and skin laxity to determine the precise entry points and pull-angles. The number of MINT threads and their specific placement will be expertly determined after a personal consultation to ensure a refreshed, natural-looking silhouette that never looks "over-pulled." Material: MINT™ Molded PDO (Bi-directional, Helical Cogs) Primary Goal: Physical lifting of sagging jowls, cheeks, and double chin Ideal For: Moderate sagging, loss of jawline definition, and deep folds Longevity: Results last 12–18 months Procedure Time: 45 minutes Recovery: 3–7 days of mild swelling/bruising; a "tugging" sensation is normal

Our Lip & Smile Design combines artistic 3D filling with muscle-relaxing Botox to create a youthful, approachable look. We don’t believe in a "one-size-fits-all" lip; instead, we offer a curated selection of fillers to match your desired texture and movement: Brand Selection: → Rejuviel (Korea): A high-performance domestic filler known for its smooth integration and excellent cost-effectiveness. Great for natural, soft volume. → Belotero (CH/DE): The European gold standard. Belotero integrates seamlessly for a "no-filler" feel. → Juvederm (USA): Utilizing Vycross technology, Juvederm offers a smooth, long-lasting result (up to 12 months) with minimal swelling, perfect for plush, hydrated volume. Procedure Time: 30-40 minutes (including numbing) Pain Level: Low (Fillers contain Lidocaine + Topical numbing applied) Downtime: 3–7 days for swelling to fully subside Result Goal: Balanced symmetry, defined borders, and an "upturned" smile

Our 3D Design Filler service is not just about adding volume—it’s about restoring the natural architecture of your face. By using a multi-dimensional approach, we analyze your facial structure from every angle (front, profile, and 45°) to create a balanced, harmonious look. We exclusively use the "Gold Standard" of imported, FDA-approved Hyaluronic Acid (HA) fillers, each chosen for its unique properties: Belotero (Germany): Features a cohesive polydensified matrix (CPM) that integrates seamlessly into the skin. Perfect for smoothing fine lines and delicate areas like under-eyes without a "blue" tint (Tyndall effect). Juvederm (USA): Utilizing Vycross technology, it offers a smooth, long-lasting result with minimal swelling. The top choice for soft, natural lip volume and cheek contouring. Treatment Time Approximately 30-50 minutes (including numbing) Anesthesia Topical numbing cream is applied before injection All three filler brands include lidocaine for enhanced comfort Recommended For Under-eye hollows or dark circles Nasolabial folds and marionette lines Lips, cheeks, and jawline definition Patients seeking safe, natural-looking, non-surgical facial shaping Target Areas: Forehead, temples, cheeks, smile lines, and chin filler Treatment Plan and Duration of Results Results are visible immediately after treatment Duration depends on the filler used: typically 9 to 18 months Touch-ups may be done every 6 to 12 months as needed Post-Treatment Care Avoid alcohol, smoking, and sauna use for 1 week Use lukewarm water when cleansing on the day of treatment Mild swelling or bruising may occur and typically resolves in a few days Avoid pressure or massage on treated areas Contact the clinic if you experience any discomfort or prolonged symptoms

Experience the synergy of two world-class technologies in one session. The InMode FX + Forma combination targets the face at every level - from the deep fat layers to the surface of the skin for a truly rejuvenated, "snatched" appearance. InMode FX (The Sculptor): Targets the lower face and jawline. Using radiofrequency and vacuum suction, it permanently destroys unwanted fat cells in the jowls and under-chin area while tightening the skin. InMode Forma (The Polisher): Forma uses bipolar RF energy to provide deep, uniform heating to the entire face. This stimulates immediate collagen contraction and long-term remodeling for a smooth, firm, and radiant complexion. What it treats: Lower Face: Slims jowls and defines the jawline (FX). Full Face: Tightens loose skin and reduces fine lines (Forma). Under Chin: Eliminates "double chin" volume (FX). Overall Texture: Improves skin elasticity and brightness (Forma). Treatment Time: 50-60 minutes (with numbing cream) Anesthesia: None required; Forma feels like a "hot stone massage" Downtime: 3–5 days of potential redness or minor bruising in FX areas Results: Instant "Forma glow" with visible contouring appearing in 2–4 weeks Recommended: 3 sessions spaced 4 weeks apart for maximum fat reduction and skin firming

What is Ultherapy Prime + Thermage? Ultherapy Prime + Thermage is a powerful non-surgical combination treatment for lifting, tightening, and firming facial skin. Ultherapy Prime uses focused ultrasound energy to target the SMAS (Superficial Musculoaponeurotic System) layer, stimulating deep collagen production without damaging the skin’s surface. The Prime protocol uses three tips (4.5mm, 3.0mm, 1.5mm) in one session for precise multi-layer lifting. The 300-shot protocol is ideal for partial facial areas like the lower face, jawline, or neck. Thermage uses radiofrequency (RF) energy to uniformly heat the deeper dermal layers, tightening existing collagen and stimulating new collagen production. This improves skin laxity, texture, and fine lines. The 600-shot protocol (600 S) provides effective coverage for targeted facial zones, delivering smoother, firmer skin with minimal downtime. Combining Ultherapy Prime and Thermage enhances lifting, tightening, and overall skin quality for natural-looking rejuvenation without surgery. Treatment Time ~90 minutes Anesthesia Topical numbing is applied before Ultherapy Prime. Thermage includes a cooling system for comfort. Mild heat, tingling, or temporary discomfort may be felt during both treatments. Recommended For Sagging jawline or cheeks Drooping brows or eyelids Loose neck or under-chin skin Fine lines and early skin laxity Uneven skin texture Patients seeking lifting and firming without surgery Target Areas Decolletage Forehead and brows Cheeks and jawline Under chin and neck Partial face zones (Ultherapy 300 shots) Localized facial areas (Thermage 600 shots) Treatment Plan and Results Typically performed as a one-time session Ultherapy Prime: Immediate tightening felt, visible lifting develops in 1–3 months, lasting 12–18 months. Annual maintenance recommended. Thermage: Gradual skin tightening and smoothing appears over 2–6 months, results can last 12+ months. Post-Treatment Care Mild redness, swelling, or slight discomfort may occur but fades within hours. Cleanse with cool or lukewarm water and a gentle, low-irritant cleanser. Avoid excessive alcohol, intense exercise, saunas, and hot baths for one week. Skip exfoliants and peeling treatments for one week. Makeup can be applied right after treatment. Apply moisturizer regularly and use sunscreen daily. Contact the clinic if you notice any unusual symptoms.

As we age, the facial ligaments that hold our skin in place begin to loosen, leading to sagging and "heaviness" in the lower face. Our Design Ligament Filler protocol targets these specific anchor points to provide a vertical lift from the inside out. The Brand Selection for Structural Support: → Rejuviel (Korea): A smooth, high-integration domestic filler ideal for soft ligament reinforcement and natural-looking transitions. →Belotero (Germany): Using CPM technology, it integrates perfectly into the tissue, making it the best choice for a seamless lift in areas with thinner skin. →Juvederm (USA): Utilizing Vycross technology, it offers a cohesive, long-lasting lift with minimal swelling, perfect for a firm yet hydrated finish. How it Works: Instead of filling wrinkles, we place small, precise amounts of filler directly beneath the facial ligaments (such as the zygomatic or mandibular ligaments). This acts as a "bolster," tightening the ligament and pulling the overlying skin upward for a refreshed, tightened appearance. Primary Goal: Lifting sagging tissue by reinforcing facial anchors Procedure Time: 30–40 minutes Downtime: Minimal swelling or localized tenderness for 1–2 days Results: Immediate lifting with full integration at 2 weeks Longevity: Typically lasts 12 months

Our Hybrid Nose Lift is designed for those who want a "surgical-style" result without the downtime. While filler adds volume and height, threads provide the "scaffolding" to ensure the nose looks sharp and stays in place. How the Hybrid Approach Works: 2-Thread Bridge Lift: We insert specialized, biocompatible threads into the nasal bridge. These threads act as a vertical support structure, providing an immediate lift to the bridge and tip that is resistant to "spreading" or widening over time. Filler: Once the structure is set, we use premium Hyaluronic Acid to smooth the contour and add height. Choose your brand based on your desired look: →Rejuviel (Korea): A reliable domestic option with excellent molding capabilities. →Juvederm (USA): Offers a smooth, cohesive result with minimal swelling for a natural yet defined transition. Procedure Time: 30–40 minutes Target Goal: High Bridge, Refined Tip, and Slimmer Profile Downtime: Minimal; slight swelling or "tightness" for 3–5 days Longevity: Results typically last 12 months

What is Eye Thermage FLX Eye Thermage FLX is a specialized radiofrequency treatment targeting the upper and lower eyelids. Using 225 precision-controlled shots, it stimulates collagen deep within the skin to tighten loose eyelid skin, reduce fine lines, and restore firmness to the eye contour without needles or downtime. Treatment Time Approximately 20 minutes Anesthesia No anesthesia required. Built-in cooling and vibration enhance comfort during the procedure. Recommended For Loose or sagging upper eyelids Wrinkles, fine lines, and crepey skin under the eyes Puffy or tired-looking eyes Early signs of aging around the eyes Key Benefits Lifts and firms the upper and lower eyelids Improves skin elasticity and smooths fine lines Restores youthful contour around the eyes Safe for all skin types with minimal discomfort Treatment Plan and Duration of Results One session is typically sufficient Results develop gradually over 1 to 3 months as collagen regenerates Effects can last 12 months depending on skin condition Yearly maintenance is recommended for optimal results Post-Treatment Care Mild redness or swelling may appear but usually fades within a few hours No downtime required Use sunscreen and avoid rubbing the treated area for 1 to 2 days Eye Thermage FLX is an ideal solution for patients seeking a natural, refreshed look around the eyes without surgery.

The Excel V is a medical-grade powerhouse that uses two precise wavelengths (532nm and 1064nm) to treat over 20 different skin concerns. By utilizing all three modes, we provide a holistic "color correction" for your face, neutralizing the red and brown tones that can make the skin look tired or aged. The Triple-Mode Advantage: Mode 1: Redness & Vessel Clear: Targets visible "thread veins," rosacea, and general facial flushing by gently coagulating the blood vessels so the body can naturally clear them. Mode 2: Pigment & Spot Removal: Specifically shatters "brown spots," sun damage, and freckles. This mode creates a bright, uniform canvas by erasing the irregular shadows of pigmentation. Mode 3: Laser Genesis (Polishing): A micro-second pulsing mode that gently warms the skin to shrink pores, smooth out fine lines, and diffuse deep-seated redness for a "lit-from-within" glow. Professional Customization: Color correction is about balance. At Forena Clinic, our medical team calibrates the energy levels for each mode based on your specific vascular and pigmentary patterns. Your personalized triple-layer map will be expertly determined after a personal consultation to ensure a refreshed silhouette for your skin that looks naturally vibrant. Technology Dual-Wavelength (532/1064nm) + Genesis Mode Primary Goal Simultaneous treatment of redness, brown spots, and texture Ideal For Rosacea, visible veins, sunspots, and overall dullness Sessions 5-10 sessions recommended, spaced 3–4 weeks apart Procedure Time 20–30 minutes Recovery Minimal; mild temporary redness or slight swelling for 1–2 days

Potenza is the gold standard in RF microneedling, and our use of the N-Tip sets a new benchmark for texture correction. While traditional insulated tips only target the very bottom of the needle, the N-Tip (Non-insulated) allows energy to flow through the entire needle length. This creates a uniform thermal effect from the deep dermal layers all the way up to the surface, making it exceptionally effective for skin that requires comprehensive structural repair. Advantage: Total Tissue Engagement: Because the entire needle is active, the RF energy treats every layer of the skin it passes through, maximizing collagen and elastin stimulation. Surface & Deep Refinement: Simultaneously addresses deep-set concerns like acne scars and fine lines while refining surface-level issues like enlarged pores and uneven tone. Superior Tightening: The wide-reaching thermal energy creates a more significant lifting and firming effect compared to standard tips, "shrink-wrapping" the skin for a tighter profile. Professional Customization: At Forena Clinic, our medical team adjusts the depth and energy intensity based on your specific skin thickness and sensitivity. Your personalized Potenza map will be expertly determined after a personal consultation to ensure a high-definition result with optimal safety. Technology RF Microneedling with Tip (Non-insulated) Primary Goal Deep scar remodeling, pore reduction, and overall tightening Ideal For Acne scars, rough texture, enlarged pores, and skin laxity Sessions 3 sessions recommended, spaced 4 weeks apart Procedure Time 30–45 minutes (including numbing) Recovery 1–3 days of mild redness; "micro-scabbing" may occur

Our SS Slim service is a premium body-sculpting solution for those who want to tackle stubborn fat without the side effects often associated with steroids. The generous 200cc volume allows for deep, uniform treatment of larger areas, ensuring a smooth transition and a visible reduction in body circumference. The SS Slimfit Advantage: [No Steroids] Guarantee: Our formula is strictly steroid-free, eliminating the risk of skin thinning, hormonal disruption, or irregular indentations. This makes it the safest choice for high-volume body work. Large Area Coverage: The 200cc dose is specifically designed to treat significant zones such as the full abdomen, flanks (love handles), outer thighs, or back fat. Smooth Silhouette: By utilizing a higher volume of a gentler, more effective solution, we achieve a more uniform fat reduction that looks natural and athletic rather than "hollowed out." Professional Customization: Body contouring requires a deep understanding of fat distribution and skin elasticity. At Forena Clinic, while 200cc provides the foundation for total body refinement, your final dosage and treatment plan will be expertly determined after a personal consultation to ensure the results align with your specific body goals. Volume 200cc (High-Volume Body Coverage) Formula [No Steroids] Pure Lipolytic Formula Ideal For Abdomen, Flanks, Thighs, and larger body areas Procedure Time 30–40 minutes Result Timeline Initial slimming typically visible within 2–4 weeks Recovery Minimal; mild temporary swelling or tenderness Sessions 2–3 sessions recommended, spaced 4 weeks apart

This protocol is the Forena Ultra V PCL Renewal, featuring the premium Polycaprolactone (PCL) thread technology. Unlike traditional threads, PCL is the next-generation material known for its superior flexibility and extended longevity. This treatment creates a long-lasting collagen scaffold that refines the skin’s architectural silhouette for up to two years, providing a high-definition lift that remains soft and natural to the touch. 1. Taglines (Under 100 Characters) Ultra V PCL: The Next-Gen Collagen Scaffold for Long-Lasting Skin Tightening. (76 chars) Flexible Strength. Achieve a 24-Month Refined Silhouette with Ultra V PCL Threads. (80 chars) High-Definition Longevity. Experience the Premium PCL Lift at Forena Clinic. (77 chars) 2. Service Description: Ultra V PCL Threads Extended Collagen Synthesis • Bio-Stimulatory Tightening • Enhanced Flexibility The Ultra V PCL protocol utilizes Polycaprolactone, a medical-grade material that is significantly more durable than traditional PDO. PCL threads are highly flexible and move naturally with your facial expressions, making them the ideal choice for creating a high-definition profile without the stiffness. The PCL Advantage: 2-Year Longevity: While standard threads dissolve in 6 months, PCL remains active in the skin for up to 18–24 months, providing a much longer window of continuous collagen and elastin stimulation. Superior Softness: The material is exceptionally pliable. This ensures that the tightening effect feels natural and "integrated" within your skin's silhouette, even in highly mobile areas like the cheeks and jawline. White-Mode Brightening: PCL is known to stimulate localized micro-circulation more effectively than other materials, often resulting in a subtle "brightening" effect on the skin's surface. Structural Integrity: The PCL scaffold acts as a long-term internal "support system," gradually improving skin density and smoothing out deep textural irregularities from within. Professional Customization: The placement of PCL threads requires an expert understanding of facial vectors and dermal t Material Polycaprolactone (PCL) - Premium Long-Lasting Suture Primary Goal Deep structural tightening and long-term collagen induction Ideal For Significant loss of elasticity, sagging jawlines, and "crepey" texture Duration Results last up to 24 months Recovery Minimal; potential for slight swelling or tenderness for 3–5 days Flexibility High; moves naturally with facial expressions